Pozzolanic Cement 

• 45% < Clinker < 64% 
• 36% <Calcined natural pozzolana < 55% 
• Setting time regulating calcium sulfate

Technical requirements

• Chemical

Sulfate (SO3) < 3,5%

Chloride (CI) < 0,10%

Passes the pozzolanicity test

• Physical

Initial Setting (min)> 75 

Soundness(mm) <10

• Mechanical

Compressive Strength Development Minimum values

7 days: 16,0 MPa

28 days: 32,5 MPa < 28 days < 52,5 Mpa

Advantages of concrete produced with CEM IV/B (Q) 32,5 R

•  Low hydration heat 
•  High workability
•  Particularly suitable for XC exposure classes.

Recommended Applications

• Ready – Mix Concrete Suitable for the production of all comprehensive strength classes.
• Precast Production Suitable for production of masonry blocks and lightweight concrete. 
• Road Pavements Suitable for concrete pavements for road.
• General Use All kinds of grout mortar, plaster and repair works.
• Mass concrete.

Environment, Safety and Storage

• Wear suitable protective clothing, gloves,eye and face protection equipment.
• Lower CO2 emission into the atmosphere.
• For detailed safety information, please contact with our Sales Department.

Precautions in Application

• Follow the standard minimum cement content and maximum water/cement ratio.
• Provide adequate protection and cure according to correspondent standards.
• Keep framework and scaffolding in place until adequate mechanical strength is obtained.
• Follow the correspondant standard and specifications for aggressive environments.

Not recommended for:

• Not suitable for ready-mixed concrete productions where early strength is critical
• Not suitable for concrete production to be poured without any measures under cold weather conditions.